Taalk Help Center

The Dial Funnel Explained

The Dial funnel card shows how your dials turn into conversations and transfers. Read it with retries in mind: it counts dials, not people.

Go to Dashboard (or Outreach › Campaigns › open a campaign › Reporting) › Dial funnel. It sits under the live card.

The four steps

Step What it counts
Dialed Every call in the date range, outbound and inbound, including dials that failed before ringing
Connected Calls picked up for more than 1 second. Includes answering machines and voicemail
Human answered Connected calls answered by a person, not a machine
Transferred Calls where the AI agent started a transfer

Each step is shown as a count and as a share of total dials, not as a share of the step above. So if you dial 10,000 times, connect 6,500, reach a person on 900 and transfer 20, the card reads 100%, 65%, 9% and 0.2%.

The card hides when nothing was dialed, or when Dialer Performance is switched off under the gear.

Why the funnel and the rate tiles differ

The funnel divides by all dials. Two rate tiles in the Conversion card divide by Dial succeeded instead, which leaves out dials the carrier rejected:

Number Divided by
Funnel Human answered % All dials
Human answer rate Dial succeeded
Funnel Transferred % All dials
Dial to transfer Dial succeeded
KPI Live transfers "% of dials" All dials

If many dials fail (bad numbers), the funnel percentages fall further than the rate tiles. Check Dial failed in the Dialer card.

How retries inflate dials

Every attempt is its own dial. A contact called three times adds three dials, even if they transfer on the third try.

Example: 1,000 contacts, up to three calls each.

Attempt Dials Transfers
1st 1,000 3
2nd 700 1
3rd 500 1
Total 2,200 5
  • Dial to transfer = 5 ÷ 2,200 = 0.23%.
  • If you'd stopped after one attempt: 3 ÷ 1,000 = 0.30%.
  • Per contact: 5 of 1,000 contacts transferred = 0.5%.

Same campaign, three different numbers. More retries usually mean more transfers in total but a lower rate per dial. Compare campaigns with similar retry settings, or use the contact funnel below. Retry settings are explained in Retry and Stop Rules.

To see how each attempt performs, open the Attempt Performance Curve on the Economics page. See Campaign Analytics.

Dial funnel vs. Contact funnel

Go to Outreach › Campaigns › open a campaign › Contacts for the Contact funnel. It counts each contact once, not per dial.

Dial funnel Contact funnel
Where Dashboard, Campaign › Reporting Campaign › Contacts
Counts Dials (sessions) People
Steps Dialed, Connected, Human answered, Transferred Contacts, Reached, Transferred, Success
"Reached" / "Connected" includes voicemail Yes Yes
Last step Transfers started Contacts marked successful (Taalk_Success)

Use the dial funnel to judge dialing efficiency and cost. Use the contact funnel to judge how much of your list you've reached and converted. Attempts per contact on the same tab shows how many contacts have had 1, 2, 3 or 4+ calls. See Contact vs. Session Outcomes.

Reading the funnel

What you see Look at
Low Connected Caller ID health and list quality. See Connection Rate.
Connected is fine, low Human answered Many machines: dial times, ring timeout and lead freshness. See Human Answer Rate.
Human answered is fine, low Transferred The agent's script and transfer rules. See AI Conversion Rate.
Transfers are fine, results are poor What happens after the handoff. See Transfer Quality.

Work top-down: fix reach before you tune the script.

FAQ

Why does Dialed include inbound calls? The card counts every call in the range, whichever direction. If you take a lot of inbound calls, expect the funnel to differ from a pure outbound campaign.

Why can Connected be much higher than Human answered? Answering machines and voicemail count as connected.

For every dashboard number, see the Metrics Glossary.