Billable Transfer Rate
AI Billable Transfer Rate is the share of your transfers where the operator stayed on the call long enough to count, 2 minutes or more. It tells you whether handoffs turn into real conversations.
Formula
AI Billable Transfer Rate = Transfers in the 120-second band ÷ All transfers
- Transfers in the 120-second band are transfers where the operator talked for at least 120 seconds, measured from pickup (the wait for pickup isn't counted).
- All transfers are every call where the AI agent started a transfer, picked up or not.
The band comes from the value tiers in your workspace, and today it works like this:
| Your workspace value tiers | What the rate counts |
|---|---|
| No value for Value Per Call Transferred Longer than 120s | Nothing. The rate shows "—" |
| A 120s value, no 10m or 20m value | Transfers of 2 minutes or more |
| A 120s value and a 10m value | Only transfers from 2 to 10 minutes. Longer ones are left out, so the rate reads lower |
To get a true "2 minutes or more" rate, set a value for 120s and leave the 10m and 20m values at $0. Value tiers are in Workspace menu › Manage workspaces › your workspace › Company Detail. See Transfer Quality.
Where to find it
- Dashboard › Conversion card › AI billable transfer rate.
- Outreach › Campaigns › open a campaign › Reporting › Conversion card › AI billable transfer rate.
- Top AI Agents and Top Campaigns leaderboards › Billable Rate (shown when above zero).
The Transfer duration card shows every band, so you can see where transfers land.
Benchmarks
| Range | Status | Next step |
|---|---|---|
| Above 30% | Strong performance | Transfers are connecting well. |
| 10% – 30% | Decent | Fine-tune transfer delay and operator pickup. |
| Below 10% | Pause and review | Check operator availability and routing. |
How to read changes
- Drops with a rise in Avg. transfer delay: callers are hanging up while they wait. See Transfer Delay.
- Drops outside your team's hours: the AI is transferring when no one can pick up. Align the campaign schedule with staffing.
- Drops after a script change: the agent may be transferring people who aren't ready. Listen to short transfers (the short tag in the call log).
- Changes right after you edit value tiers: the band changed, not the calls.
FAQ
Why does it show "—"? Either there were no transfers, or your workspace has no 120-second value tier.
Is this what Taalk bills me for? No. It's a quality measure. Your charges are explained in How Billing Works.
Why is the Economics ">2m" count different? On the Economics page, >2m counts transfers of 2 to 10 minutes only; longer ones are in >10m and >20m. It always uses those three lengths, whatever your value tiers.
For every dashboard number in one place, see the Metrics Glossary.